CDM-625 Advanced Satellite Modem
Front Panel Operation
5.9
SELECT: Utility
Utilities:
LED
Select a Utilities parameter using the
5.9.1
Utilities: Set-RTC
Edit Real-Time Clock:
Time: 12:01:02
To edit the time and date settings of the Real-Time Clock, select the digit to be edited using the
◄ ►
arrow keys, edit the value of the digit using the
IMPORTANT
5.9.2
Utilities: Display Brightness
Edit Display Brightness:
To edit the display BRIGHTNESS, use the
selected are 25%, 50%, 75% or 100%. Press ENTER when the brightness is suitable.
5.9.3
Utilities: LEDs
Front Panel LED Test: Enabled
Select Enable or Disable using the
LEDs on the front panel then resume normal operations.
5.9.4
Utilities: 1:1 Manual Switch
Press ENTER key to force Unit into
Standby (1:1 only)
If the unit is part of a 1:1 redundant pair of modems, and this unit, is currently on-line, pressing
ENTER will cause the unit to switch to standby.
Set-RTC
1:1
1:N
Circuit-ID
Note that in accordance with international convention, the date is shown in
DAY-MONTH-YEAR format.
100%
▲ ▼
Display-Brightness
Firmware
◄ ►
arrow keys, then press ENTER
Date:26/10/06
▲ ▼
arrow keys. The values of brightness that can be
▲ ▼
(Enable,Disable)
arrow keys, then press ENTER. This will test all of the
5–58
MN-0000036 (Ref MN/CDM625.IOM)
Em
.
(34v)
arrow keys, then press ENTER.
(v)
(v)
Revision 1