2-6. Imaging Unit
(1) Disassembly, Cleaning, and Replacement and Starter Changing of
the Imaging Unit
Replacement of the PC Drum
Replacement of the Toner Scattering Prevention Plate
1. Remove the Imaging Unit from the copier.
2. Remove two screws to remove the Imaging Unit Cover.
3. Unplug the Counter connector.
4. Remove one screw to remove the PC Drum Charge
Corona Unit.
5. Remove two screws and one Drum Pin to remove the
PC Drum.
NOTE
Whenever the PC Drum has been replaced, be sure
to make the "Adjustments of the Optimum Exposure
Setting in the Manual and Auto Mode." See pp. D-51
to D-52.
6. Remove one screw and one shoulder screw to remove
the Toner Scattering Prevention Plate.
7. Tilt the Developing Unit to remove the developer.
D-27