Using Memory Recall; Memory Recall - Minolta Di200f Operator's Manual

3-62

8. Using Memory Recall

Memory Recall

Touching [Memory Recall] on the Touch Panel after a copy cycle has been completed will allow you to
make a copy using the previous image data and copying mode without having to reload the original.
Setting Memory Recall
1
Touch [Memory Recall].
2
To change the number of copies to be made,
enter the new number from the 10-Key Pad.
Useful Tip
To change the number of copies to be made,
press the Clear key and set the new number.
3
Press the Start key, and the machine will start
the print cycle.
NOTES
• Memory Recall available from User's Choice
must be turned ON to use this function.☞p.8-2
• This function cannot be used in the Interrupt
mode.
• The preceding image data and copy settings are
cleared to disable Memory Recall when any of
the following operations is performed:
•The machine is turned OFF.
4017P107EA
•The machine scans a new original (or the Start
key is pressed).
•The Access Mode, Interrupt, Utility, Panel
Reset, or Scan key is pressed.
• The Clear or Panel Reset key is pressed while
the machine remains idle.
Useful Tip
After you have made copies from a confidential
document, it is recommended that you press the
Panel Reset key to erase the data.
4017P108EA