13
ORIGINAL SIZE DETECTING SENSORS
13-1. Original Size Detecting Sensors
The Original Size Detecting Sensors are mounted only on the copiers for the
following marketing areas. The number and location of these sensors vary
depending on the marketing area.
Area J: Japan
Area H: Hong Kong
Area O: ROC, South Africa, Singapore, Malaysia, Indonesia, Saudi Arabia,
Area O:
Australia, New Zealand, Curaceau
The two (four only for area H) fixed sensors installed in the Optical Section
receive the light reflected off the original to determine the size of the original
in the Auto Paper and Auto Size Mode.
Image density of the original (OD) that can be detected is 0.8 or less (except
for transparencies, translucent paper, and an original that does not lie flat).
Original Size Detecting Sensor (CD)
Original Size Detecting Sensor (FD)
Original Size Detecting Board UN2
M-46