Removing The High Resistance Board; Removing The First Drawer Paper Size Detecting Board - Minolta magicolor 7300 Service Manual

FrameMaker Ver.6E (PC) magicolor 7300 ASSEMBLY/DISASSEMBLY
02.08.08
4134D068AA
(4)

Removing the High Resistance Board

1. Remove the Left Cover.
2. Remove the Panel Cover.
3. Remove the Top Cover.
4. Remove the Rear Cover.
High Resistance Board
4134D024AA
(5)

Removing the First Drawer Paper Size Detecting Board

1. Remove the Left Cover.
2. Remove the Panel Cover.
3. Remove the Top Cover.
4. Remove the Rear Cover.
5. Remove High Voltage Units 1 and 2.
D-17
4134D062AA
4134D026AA
7. Remove all connectors from the 2nd Drawer Con-
trol Board.
8. Remove the PWB holder.
9. Remove two screws, and the 2nd Drawer Control
Board.
5. Remove two screws, and the High Resistance
Board.
6. Remove four screws, and the PWB support.
7. Remove twelve wire saddles.
8. Remove nine screws, and the Print Unit Drive
Unit.
D-14