Fujitsu PRIMEQUEST 2000 Series Message Reference page 95

MMB Messages
Meaning:
The PF device is not active.
Corrective action:
An adapter failure may have occurred. Replace the adapter.
Severity:
Warning
11802
Adapter error (Fan has stopped)
Meaning:
An adapter error occurred.
Corrective action:
An adapter failure may have occurred. Replace the adapter.
Severity:
Warning
11807
Adapter error (link_config FAILED)
Meaning:
The condition and speed of the link cannot be set.
Corrective action:
An adapter failure may have occurred. Replace the adapter.
Severity:
Warning
11808
Adapter error (Unable to allocate MSI-X interrupts)
Meaning:
The vector required for an MSI-X interrupt cannot be assigned.
Corrective action:
An adapter failure may have occurred. Replace the adapter.
Severity:
Warning
11815
Adapter error (ixgbe_up failed after reset)
Meaning:
After a reset, the card could not work well.
Corrective action:
An adapter failure may have occurred. Replace the adapter.
Severity:
Warning
11816
Adapter or Software error (HW Init failed)
Meaning:
Initialization of hardware failed.
Corrective action:
Collect the data for investigation (dump or fjsnap). Ask your sales representative or a field engineer to
perform an investigation.
Severity:
Warning
11817
Adapter error (Hardware Error)
Meaning:
A hardware error was detected.
Corrective action:
High probability of an adapter failure. Proceed to adapter replacement
C122-E178-02EN
79