Fujitsu PRIMEQUEST 2000 Series Message Reference page 31

MMB Messages
Severity:
Error
15070293
Diag: RTC Time Operation Error
Meaning:
An error was detected in the internal clock.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
15070299
Diag: HUB Register Error
Meaning:
A HUB error was detected.
Corrective action: An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
1507029A
Diag: UART Loopback Error
Meaning:
The looped-back data could not be received correctly.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
1507029B
Diag: NIC Loopback Timeout
Meaning:
Time-out has occurred in loop back.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
150702A3
Diag: RTC Low Battery Error
Meaning:
An internal clock battery error was detected.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
150702AA
Diag: UART Timeout
Meaning:
A loop back send or receive time-out has occurred.
Corrective action:
An MMB must be replaced. Contact your sales representative or a field engineer.
Severity:
Error
150702AB
Diag: NIC Device Not Found
C122-E178-02EN
15