Fujitsu PRIMEQUEST 2000 Series Message Reference page 105

MMB Messages
Warning
13040
Adapter error (Firmware Reload FAILED)
Meaning:
The reload of firmware failed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13041
Adapter error (Cannot recover)
Meaning:
The adapter reset failed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13049
Adapter error (IOC says it doesn't support F/W download)
Meaning:
A response that invalidates the download request sent to firmware was received. (Firmware download is not
supported.)
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13050
Adapter error (IOC says: IOC_BUSY)
Meaning:
A busy response to the firmware download request was received.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13051
Adapter error (IOC returned bad status)
Meaning:
An "Other error" response to the firmware download request was received.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13078
Adapter error (Busy with IOC Reset)
Meaning:
The adapter is performing IOC Reset and is in the busy state.
Corrective action:
Collect the data for investigation (dump or fjsnap). Contact your sales representative or a field engineer.
Replace the adapter.
Severity:
Warning
C122-E178-02EN
89