Fujitsu PRIMEQUEST 2000 Series Message Reference page 196

MMB Messages
I_00541
Nothing is checked.
Meaning:
Nothing is checked.
Corrective action:
Check the object.
Severity:
Info
W_00575
Unable to change partition configuration because this partition is powered on.
Meaning:
The partition cannot change the partition configuration because of the state of
Power On.
Corrective action:
Power off this partition.
Severity:
Warning
W_00576
Unable to execute %s because the firmware is updating.
Meaning:
The specified operation cannot process due to under the firmware update.
Corrective action:
Wait for finish of firmware update.
Severity:
Warning
W_00583
Unable to execute Firmware Update.
Please check the machine status.
Meaning:
Firmware Update can't operate. Please check the machine status.
Corrective action:
Please check the machine status.
Severity:
Warning
W_00585
Dynamic Reconfiguration Mode cannot be set to this Partition because of PCI Bus Mode.
Meaning:
Dynamic Reconfiguration Mode cannot be set to this partition because this partition is PCI Bus Mode
Corrective action:
Please set Dynamic Reconfiguration mode to this partition after set to PCI Segment Mode。
Severity:
Warning
W_00586
Dynamic Reconfiguration Mode cannot be set to this Partition because of Fixed I/O Mode.
Meaning:
Dynamic Reconfiguration Mode cannot be set to this partition because this partition is Fixed I/O Mode
Corrective action:
Please set Dynamic Reconfiguration mode to this partition after set to Fixed I/O Mode。
Severity:
Warning
W_00587
Unable to execute Power Control because the firmware is updating.
C122-E178-02EN
180