Fujitsu PRIMEQUEST 2000 Series Message Reference page 106

MMB Messages
13106
Adapter error (IOC issue of TaskMgmt failed)
Meaning:
Issuing a SCSI Task Management request failed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13107
Adapter error (Error issuing abort task)
Meaning:
The result of Abort Task is displayed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13115
Adapter error (Firmware Reload FAILED)
Meaning:
The reload of firmware failed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13120
Adapter error (detects pci parity error)
Meaning:
A parity error occurred during reading to PCI.
Corrective action:
The HBA must be replaced. If the problem persists even after you replace the HBA, replace the device (e.g.,
PCI_Box) connected to the HBA.
Severity:
Warning
13121
Adapter error (detects pci parity error)
Meaning:
A parity error occurred during reading to PCI. The operation ran out of retries.
Corrective action:
The HBA must be replaced. If the problem persists even after you replace the HBA, replace the device (e.g.,
PCI_Box) connected to the HBA.
Severity:
Warning
13122
Adapter error (couldn't read pci register)
Meaning:
Reading of the PCI status register failed.
Corrective action:
The HBA must be replaced. If the problem persists even after you replace the HBA, replace the device (e.g.,
PCI_Box) connected to the HBA.
Severity:
Warning
13123
Adapter error (detects pci parity error)
C122-E178-02EN
90