Fujitsu PRIMEQUEST 2000 Series Message Reference page 133

MMB Messages
Meaning:
The power control command has failed.
aaaa ：Exception code
bb ： Action code
Corrective action:
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
Unable to power off the Partition#n because you have not authority to operate this partition.
Meaning:
The Partition Operator has issued a power Off instruction for a partition that is not within the scope of
management.
(Power Off of Partition#n is suppressed. This error message is displayed only for Partition Operators.)
Corrective action:
Confirm the processing target partition.
Severity:
Warning
Unable to power off the partition(s) because the partition which does not have authority to you is
included in the specified parameter.
Meaning:
The Partition Operator has issued a power Off instruction to a partition that is not within the scope of
management.
(Power Off is suppressed for all the specified partitions. This error message is displayed only for Partition
Operators)
Corrective action:
Check the command parameter and the processing target partition.
Severity:
Warning
Unable to power on the Partition#n because you have not authority to operate this partition.
Meaning:
The Partition Operator has issued a power On instruction for a partition which is not within the scope of
management.
(Power On is suppressed for Partition#n. This error message is displayed only for partition Operators)
Corrective action:
Check the processing target partition.
Severity:
Warning
Unable to power on the partition (s) because the partition which does not have authority to you is
included in the specified parameter.
Meaning:
The Partition Operator has issued a power On instruction for a partition which is not within the scope of
management.
(Power On is suppressed for the specified partition. This error message is displayed only for partition
Operators)
Corrective action:
Check the command parameter and the processing target partition.
Severity:
Warning
Specified host does NOT respond.
Meaning:
There is no communication with the host.
Corrective action:
Check the specified URL with the Firmware Update.
Retry if there is no problem.
Severity:
117
C122-E178-02EN