Fujitsu PRIMEQUEST 2000 Series Message Reference page 93

MMB Messages
Meaning:
A hardware error was detected.
Corrective action:
An adapter failure may have occurred. Replace the adapter.
Severity:
Warning
11603
Adapter error (NVM Read Error while reading MAC address)
Meaning:
An NVM read error was detected during reading of a MAC address.
Corrective action:
An adapter failure may have occurred. Replace the adapter.
Severity:
Warning
11610
Adapter error (pattern test reg failed)
Meaning:
The pattern test failed.
Corrective action:
An adapter failure may have occurred. Replace the adapter.
Severity:
Warning
11611
Adapter error (set/check reg test failed)
Meaning:
The register test failed.
Corrective action:
An adapter failure may have occurred. Replace the adapter.
Severity:
Warning
11612
Adapter error (failed STATUS register test)
Meaning:
The STATUS register test failed.
Corrective action:
An adapter failure may have occurred. Replace the adapter.
Severity:
Warning
11615
Adapter error (Cannot do PHY loopback test when SoL/IDER is active.)
Meaning:
The PHY loopback test cannot be executed.
Corrective action:
An adapter failure may have occurred. Replace the adapter.
Severity:
Warning
11701
Adapter error (The NVM Checksum Is Not Valid)
Meaning:
An NVM checksum error was detected.
Corrective action:
An adapter failure may have occurred. Replace the adapter.
Severity:
C122-E178-02EN
77