Fujitsu PRIMEQUEST 2000 Series Message Reference page 138

MMB Messages
No action is necessary.
Severity:
Info
Failed to execute set partition home command.
Meaning:
The set partition home command has terminated abnormally.
Corrective action:
If another message is output, see the message.
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
Failed to execute show partition configuration command.
Meaning:
The show partition configuration command has terminated abnormally.
Corrective action:
If another message is output, see the message.
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
Home SB is not set in Partition#x.
Meaning:
The Home SB is not defined in Partition#x.
Corrective action:
Confirm that the partition is correctly specified. Also confirm the partition configuration.
Severity:
Warning
Failed to execute show partition home command.
Meaning:
The show partition home command has terminated abnormally.
Corrective action:
If another message is output, see the message.
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
; is invalid character
Meaning:
";" is an invalid character.
Corrective action:
Check the command parameter.
Severity:
Warning
url is length over
Meaning:
Unable to process since the length of the URL exceeds the specified value (128Byte).
Corrective action:
Check the command parameter.
Severity:
Warning
Error: Specified file does NOT correspond to this model type.
Meaning:
An unsupported model firmware file has been specified.
C122-E178-02EN
122