Fujitsu PRIMEQUEST 2000 Series Message Reference page 103

MMB Messages
Warning
13021
Adapter error (IO unit reset failed)
Meaning:
An IO Unit Reset request sent to the adapter failed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13022
Adapter error (Wait IOC_READY state timeout)
Meaning:
The state did not change to IOC_READY even after a wait for the specified time (15 seconds).
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13023
Adapter error (Can't get IOCFacts; IOC NOT READY)
Meaning:
The IOCFACTS request cannot be executed because the adapter is in the NOT READY state.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13025
Adapter error (Invalid IOC facts reply)
Meaning:
The response to an IOCFACTS request is invalid.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13026
Adapter error (Can't get IOCFacts; IOC NOT READY)
Meaning:
The PORTFACTS request cannot be executed because the adapter is in the NOT READY state.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13027
Adapter error (Wait IOC_OP state timeout)
Meaning:
The state did not change to IOC_OP even after a wait for the specified time (60 seconds).
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13028
Adapter error (Failed to come READY after reset)
C122-E178-02EN
87