Fujitsu PRIMEQUEST 2000 Series Message Reference page 111

MMB Messages
Warning
13190
Adapter error (adapter_reset retry exhausted; stop reset operation)
Meaning:
The adapter reset count exceeded the upper limit. Stop the reset process.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13191
Adapter error (adapter_reset failed)
Meaning:
The adapter reset failed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13192
Adapter error (IOC msg unit reset failed to put ioc in ready state)
Meaning:
The reset of the IOC message unit for placing the IOC in the standby state failed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13193
Adapter error (Errata on LSI53C1030 occurred)
Meaning:
Errata No.28 of LSI53C1030 (chip) occurred during reading of the data.
Corrective action:
Re-execute read after converting the target block size of the target data into multiples of eight.
If the error keeps recurring, collect the data for investigation (dump or fjsnap), and contact your sales
representative or a field engineer.
Severity:
Warning
13194
Device error (target reset failed)
Meaning:
The target reset failed.
Corrective action:
Replace the target device. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13195
Adapter error (IOC Not operational)
Meaning:
The adapter is not in the operational state.
Corrective action:
Replace the target device. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
C122-E178-02EN
95