Fujitsu PRIMEQUEST 2000 Series Message Reference page 165

MMB Messages
E_00114
The specified SB#%aa cannot be registered as a Reserved SB.
The specified SB#%aa cannot be registered as a Reserved SB.
Corrective action:
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
E_00123
Failed to clear the status.
Meaning:
Status clearing has failed.
Corrective action:
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
E_00125
Failed to %aa.
Meaning:
%aa operation has failed.
Corrective action:
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
I_00126
Unable to reset Maintenance Mode from the Enter Maintenance Mode.
Please release Maintenance Mode if you still want to proceed.
Meaning:
The maintenance mode cannot be reset during maintenance. Continue the operation after releasing the
maintenance mode.
Corrective action:
Execute after releasing the maintenance mode.
Severity:
Info
I_00130
Maintenance operator's session has been taken over.
Meaning:
The maintenance operator privilege (session) has been taken over because the user who had set
maintenance mode has logged out.
Corrective action:
No action is necessary.
Severity:
Info
I_00201
Please select a maintenance type.
Meaning:
No maintenance type has been selected
Corrective action:
Select the maintenance type.
Severity:
Info
I_00202
Another user is currently performing maintenance.
Please release Maintenance Mode if you still want to proceed.
C122-E178-02EN
149