Fujitsu PRIMEQUEST 2000 Series Message Reference page 109

MMB Messages
13161
Adapter error (IOC Not operational)
Meaning:
The adapter is not in the operational state.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13163
Adapter error (ioc_state: DOORBELL_ACTIVE)
Meaning:
The adapter has the DOORBELL_ACTIVE flag turned on.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13173
Adapter error (no suitable DMA mask)
Meaning:
An invalid DMA mask was detected during adapter installation.
Corrective action:
An HBA or a driver has a fault. If the error keeps recurring, contact your sales representative or a field
engineer.
Severity:
Warning
13176
Adapter error (HardReset FAILED!!)
Meaning:
The hard reset of the adapter failed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13177
Adapter error (reset failed)
Meaning:
The adapter reset failed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13181
Adapter error (mpt_fault_reset_work: HardReset)
Meaning:
The result of resetting the adapter is output.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13182
Adapter error (IOC is in FAULT state after reset)
C122-E178-02EN
93