Fujitsu PRIMEQUEST 2000 Series Message Reference page 108

MMB Messages
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13140
Adapter error (Skipping because it's not operational)
Meaning:
The adapter is not in the operational state.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13141
Adapter error (Skipping because it's disabled)
Meaning:
The adapter is in the Disable state.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13142
Adapter error (Skipping because SCSI Initiator mode is NOT enabled)
Meaning:
The IOC is not in initiator mode.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13146
Adapter error (operation failed)
Meaning:
The SAS persistent operation failed.
Corrective action:
Collect the data for investigation (dump or fjsnap). Contact your sales representative or a field engineer.
Replace the adapter.
Severity:
Warning
13147
Adapter error (Controller disabled)
Meaning:
The controller is not in the active state.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13153
Adapter error (readl: detects master abort)
Meaning:
A master abort occurred in PCI read. The operation ran out of retries.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
C122-E178-02EN
92