Fujitsu PRIMEQUEST 2000 Series Message Reference page 134

MMB Messages
Warning
The specified MMB#x is NOT present.
Meaning:
As the specified MMB is not mounted, it cannot be specified as an Active MMB.
Corrective action:
Check the MMB mounting status.
Severity:
Warning
The specified MMB#x is disabled.
Meaning:
As the specified MMB has been disabled, it cannot be specified as an Active MMB.
Corrective action:
Enable the MMB.
Severity:
Warning
Are you sure to continue set active mmb? [y/n]:
Meaning:
Confirm the message that prompts for setting the Active MMB.
Corrective action:
No action is necessary.
Severity:
Info
set active_mmb failed.
Meaning:
The set active_mmb command process has failed.
(This message is displayed when there is an Offline processing error/Active MMB reset failure/other
processing exception has occurred.)
Corrective action:
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
The specified date is invalid.
Meaning:
The format of the specified date is invalid.
Corrective action:
Check the command parameter.
Severity:
Warning
Unable to set date because NTP is enabled.
Meaning:
The set date command cannot be executed since the NTP is enabled,.
Corrective action:
Disable the NTP when executing the set date command.
Severity:
Warning
Time synchronization was requested to Standby MMB.
Meaning:
The date/time zone synchronization is specified on the standby MMB.
Corrective action:
None
Severity:
C122-E178-02EN
118