Fujitsu PRIMEQUEST 2000 Series Message Reference page 190

MMB Messages
Meaning:
%s has been locked. Retry after some time.
Corrective action:
Some of the processes that occupy resources are subject to exclusive control. Try again after some time.
Severity:
Info
W_00476
Unable to execute the online update. Please try the update after the system power off.
Meaning:
Unable to execute the firmware update because the system power is on.
Corrective action:
Retry the update after turning off the power of all the partitions.
Severity:
Warning
W_00477
Select the file of update.
Meaning:
A firmware file is not selected.
Corrective action:
Select a firmware file.
Severity:
Warning
W_00478
Unable to execute the update. Standby MMB is fault or disable.
Meaning:
The firmware update cannot be executed, because there is a Fault in the Standby MMB, or it is Disabled.
Corrective action:
Check the status of the Standby MMB.
Severity:
Warning
W_00479
Unable to execute the update. TPM is effective.
Meaning:
The firmware update cannot be executed, because the TPM function is enabled for a partition.
Corrective action:
Check the TPM setting of the partition.
Severity:
Warning
W_00481
Unable to register the specified SB#%s as a Reserved SB due to the home SB is TPM enabled.
Meaning:
The specified SB cannot be specified as a Reserved SB because the TPM function of the Home SB is
enabled.
Corrective action:
Check the Home SB setting.
Severity:
Warning
W_00487
Unable to change the mode, because this partition is powered on.
Meaning:
The mode cannot be changed because the partition power is on.
Corrective action:
Turn off the partition power and then change the mode.
C122-E178-02EN
174