Fujitsu PRIMEQUEST 2000 Series Message Reference page 131

MMB Messages
The specified [SB | IOU] has not been mounted.
(In execution of the set partition home command, only the SB pattern emerges)
Corrective action:
Confirm that the SB | IOU is correctly specified, and that the specified SB | IOU has been mounted.
Severity:
Warning
Unable to add the specified SB#x to the partition due to CPU mismatch between SBs.
Meaning:
The specified SB cannot be added as there is CPU mismatch between the SBs.
Corrective action:
Make sure that the CPUs mounted on the SBs configuring the partition are the same.
Severity:
Warning
Unable to execute this command because the system is under maintenance.
Meaning:
This command cannot be executed because the system is under maintenance.
Corrective action:
Execute the operation after the maintenance has been completed.
Severity:
Warning
Unable to execute this command because the Partition#x is under maintenance.
Meaning:
This command cannot be executed because Partition#x is under maintenance.
Corrective action:
Execute the operation after the maintenance has been completed.
Severity:
Warning
Failed to execute add partition command.
Meaning:
Add partition command process has failed.
Corrective action:
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
Partition#x does not include the [SB#x | IOU#x].
Meaning:
The specified [SB | IOU] is not included in Partition#x.
(In the execution of the set partition home command, only the SB pattern emerges)
Corrective action:
Confirm that the SB | IOU is correctly specified. Also, confirm the partition configuration.
Severity:
Warning
Unable to remove the specified [SB#x | IOU#x] from the partition while the partition is running.
Meaning:
The SB or IOU cannot be removed while the partition is running.
Corrective action:
Stop the partition before starting an operation.
Severity:
Warning
Parameter missing
Meaning:
C122-E178-02EN
115