Fujitsu PRIMEQUEST 2000 Series Message Reference page 158

MMB Messages
Corrective action:
No action is necessary.
Severity:
Info
E 00031
Same name already exists. User addition failed.
Meaning:
The same name is already registered. The user cannot be added.
Displayed when an attempt is made to register a user name, which is already registered.
Corrective action:
Check the user registration list.
Severity:
Error
E_00032
No more User addition.
Meaning:
The user cannot be added as the upper limit of the number of user registration has been exceeded.
Corrective action:
Delete unnecessary users.
Severity:
Error
E_00034
Unable to change the status to Disable because the specified user is the last Administrator.
Meaning:
Cannot disable, as the specified user is the only system administrator.
Displayed when an attempt is made to delete the sole Administrator privilege user, or disable the privilege.
Corrective action:
Check in the user list.
Severity:
Error
E_00035
Unable to delete the user because the user is currently logged in.
Meaning:
Cannot delete a user who is logged in.
Corrective action:
Perform deletion after the relevant user has logged out.
Severity:
Error
E_00036
Changing Password failed.
Meaning:
Password change has failed.
Displayed when the original password that was entered is incorrect.
Corrective action:
Enter the correct Password.
Try to change again; if it fails, contact your administrator.
Severity:
Error
I_00037
Changing Password completed.
Meaning:
The password has been changed.
Corrective action:
C122-E178-02EN
142