Fujitsu PRIMEQUEST 2000 Series Message Reference page 112

MMB Messages
13196
Adapter error (Issuing HardReset)
Meaning:
The hardware will be reset.
Corrective action:
Replace the target device. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13198
Adapter error (Not Ready)
Meaning:
The adapter does not become READY.
Corrective action:
Replace the target device. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13203
Adapter error (IOC Not Active)
Meaning:
The adapter is not operating.
The message frame acquisition function returned NULL.
Corrective action:
Replace the target device. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13211
Adapter error (IOC is non-operational)
Meaning:
The adapter cannot be used.
Corrective action:
Replace the target device. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13212
Adapter error (Running mpt_dead_ioc thread failed)
Meaning:
Hardware failure. Adapter deletion (mpt_dead_ioc()) failed in driver internal processing.
Corrective action:
Replace the target device. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13213
Adapter error (Running mpt_dead_ioc thread success)
Meaning:
Hardware failure. Adapter deletion (mpt_dead_ioc()) was successful in driver internal processing.
Corrective action:
Replace the target device. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13216
Adapter error (mpt_config timed out)
Meaning:
A config request to the adapter timed out during adapter reset processing.
C122-E178-02EN
96