Fujitsu PRIMEQUEST 2000 Series Message Reference page 102

MMB Messages
13008
Adapter error (pci-suspend: IOC msg unit reset failed)
Meaning:
The IOC message unit reset process failed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13009
Adapter error (pci-resume: Cannot recover)
Meaning:
A resume operation on the adapter failed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13011
Adapter error (Adapter not ready)
Meaning:
The adapter does not become READY.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13012
Adapter error (Adapter not ready)
Meaning:
The adapter does not become READY (alt port).
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13014
Adapter error (init failure)
Meaning:
Sending an IOCInit request to the adapter failed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13018
Adapter error (Unexpected doorbell active)
Meaning:
An unexpected active state of the adapter was detected.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
Warning
13020
Adapter error (IOC msg unit reset failed)
Meaning:
An IOC Message Unit Reset request sent to the adapter failed.
Corrective action:
The HBA must be replaced. If the error keeps recurring, contact your sales representative or a field engineer.
Severity:
C122-E178-02EN
86