Fujitsu PRIMEQUEST 2000 Series Message Reference page 155

MMB Messages
Meaning:
The specified SB/IOU cannot remove because it is not constituent of the partition.
Corrective action:
Please confirm configuration of partition.
The specified [SB#$|IOU#$] is power-off.
Meaning:
The specified SB/IOU is power off state.
Corrective action:
Please confirm configuration of partition.
DR sequence timeout: SB hot-remove OS failure
Meaning:
Timeout of DR sequence occurred in OS processing.
Corrective action:
Please deal with it according to SEL and syslog of OS.
DR sequence timeout: QPI disconnection failure
Meaning:
Timeout of DR sequence occurred in disconnection QPI and the partition is reset.
Corrective action:
Please execute the following.
1. Download SEL and contact your sales representative or a field engineer.
2. Please process it according to SEL if reset of the partition is failed. Please use it continuously if reset of
the partition is success
The specified IOU#k has not stopped
Meaning:
Stopping of the specified IOU is failed.
Corrective action:
Confirm that OS operation stopped.
Please try again. If it fails, confirm syslog of OS.
Adding [SB#k|IOU#k] to Partition#Z, Failed.
Meaning:
Adding of SB/IOU is failed.
Corrective action:
Please deal with it according to other messages output at the same time
Removing [SB#k|IOU#k] from Partition#Z, Falied.
Meaning:
Removing of SB/IOU is failed.
Corrective action:
Please deal with it according to other messages output at the same time
Unable to execute power control because the firmware is updating.
Meaning:
Power control cannot execute because the firmware is updating.
Corrective action:
Wait for completing of firmware update.
Unable to execute command because the power control operating.
Meaning:
Command cannot execute because the power control is operating.
Corrective action:
Wait for completing of power control operation.
139
C122-E178-02EN