Fujitsu PRIMEQUEST 2000 Series Message Reference page 146

MMB Messages
Meaning:
Unable to set the Mirror Mode for Partition#%d, because there is a problem in the DIMM configuration.
Corrective action:
Check the DIMM configuration of the SB where the partition has been configured.
Severity:
Error
The SB with DIMM that does not satisfy requirements of Mirror Mode is registered as a Reserved SB.
If you register this partition as a Mirror Mode, Mirror Mode will be disabled when switching to
Reserved SB.
Are you sure to continue? [Y/N]
Meaning:
An SB containing a DIMM that does not satisfy the requirements of a Mirror Mode has been assigned as a
Reserved SB.
If the specified Partition is registered as a Mirror Mode, the Mirror Mode will be cancelled when switching
over to the Reserved SB. Confirmation is requested to continue processing.
Corrective action:
To continue with the setting, enter 'Y'. To interrupt the setting enter 'N'.
Severity:
Info
Unable to add the specified SB to the partition due to SB composition abnormal.
Meaning:
Unable to add the specified SB , because there is a configuration
Corrective action:
Specify the appropriate SB.
Severity:
Error
Unable to power on the Partition#%d due to abnormal SB composition.
Meaning:
Unable to power-on the specified partition, because there is an error in the SB configuration.
Corrective action:
Confirm the combination status of the SB which has to be incorporated in the specified partition.
Severity:
Error
Unable to register the specified SB#%d as a Reserved SB due to abnormal SB composition.
Meaning:
Unable to register in the Reserved SB, because there is an error in the SB configuration.
Corrective action:
Make the SB where the partition has been configured to be the same as the Reserved SB.
Severity:
Warning
Unable to register the specified Partition#%s as Mirror Mode enable because of abnormal SB
composition.
Meaning:
'Unable to set the Mirror Mode, because there is a problem in the SB configuration' is notified when there is
a problem in the SB configuration in the partition Mirror Mode setting.
Corrective action:
Confirm the combination status of the SB which has to be incorporated in the specified partition.
Severity:
Error
Error: Specified file is NOT found.
Meaning:
specified file could not be found.
Corrective action:
C122-E178-02EN
130