Fujitsu PRIMEQUEST 2000 Series Message Reference page 145

MMB Messages
Unable to register the SB as a Reserved SB, since there is an error in the DIMM configuration.
Corrective action:
Check the status of the DIMM which is mounted on the SB.
Severity:
Warning
The DIMM does not satisfy requirements of the Mirror Mode.
If you register the specified SB%s as a Reserved SB, the Mirror Mode will be disabled when
switching to specified SB.
Are you sure to continue? [Y/N]
Meaning:
An attempt was made to set the Mirror Mode for a partition in which the SB, with a DIMM configuration that
does not meet the SB requirement, has been assigned as a Reserved SB. If the setting is continued, the
Mirror Mode would be cancelled when switched to the Reserved SB, but there will be a confirmation for
continuing the settings.
Corrective action:
To continue with the setting, enter 'Y'. To interrupt the setting, enter 'N'.
Severity:
Info
Unable to register the specified Partition#%d as Mirror Mode enable because the CPU mismatch
between SBs.
Meaning:
Unable to set the Mirror Mode for Partition#%d, as the CPUs mounted between the SBs do not match.
Corrective action:
Check the placement of the CPUs mounted on the SB and the combination status.
Severity:
Error
Unable to register the specified Partition#%d as Mirror Mode enable because the DIMM does not
satisfy requirements of Mirror Mode.
Meaning:
Unable to set the Mirror Mode for the specified partition, since the DIMM does not meet the requirements of
the Mirror Mode.
Corrective action:
Check the status of the DIMM that is mounted on the SB.
Severity:
Error
Unable to register the specified Partition#%d as Mirror Mode enable because the unsupported CPU
configuration.
Meaning:
Unable to set the Mirror Mode for the Partition#%d, since the CPU does not meet the mounting criteria.
Corrective action:
Check the placement of the CPUs mounted on the SB and the combination status.
Severity:
Error
Unable to register the specified Partition#%d as Mirror Mode enable because of abnormal CPU
composition.
Meaning:
Unable to set the Mirror Mode for Partition#%d as there is a problem in the CPU configuration.
Corrective action:
Check the CPU configuration of the SB in which the partition has been configured.
Severity:
Error
Unable to register the specified Partition#%d as Mirror Mode enable because of abnormal DIMM
composition.
C122-E178-02EN
129