Fujitsu PRIMEQUEST 2000 Series Message Reference page 147

MMB Messages
Check whether there is any error in the file name or whether the file is stored in the specified path.
Severity:
Error
Error: Specified file is NOT MMB or Unified Firmware file.
Meaning:
Even if the file is an MMB Firmware File, a file which is not a unified Firmware File has been specified
Corrective action:
Check the specified file.
Severity:
Error
Command Failed Code=aa, bb
Meaning:
The update command has terminated abnormally.
aa ：Exception code
bb ：Action code
Corrective action:
If there is another message which has been output, refer the message. Try setting again. If it fails, contact
your field engineer.
Severity:
Error
Extracting an unified firmware file.
Meaning:
A unified Firmware File is extracted.
Corrective action:
None
Severity:
Info
The MMB firmware cannot be updated while any partitions are powered on.
Please try to update after the all partitions are powered off.
Meaning:
The MMB Firmware could not be updated, since there are partitions that are powered on.
Corrective action:
Try updating after turning Off the power of all the partitions.
Severity:
Warning
MMB#%d is NOT present.
Meaning:
MMB# x has not been executed.
Corrective action:
Check the MMB execution status.
Severity:
Warning
Unable to execute Firmware Update due to resource lock.
Please retry after waiting a while.
Meaning:
The Firmware Update is locked. Wait for some time and then retry.
Corrective action:
Some of the resource occupied processes are subject to exclusive control.
Please wait and retry after sometime.
Severity:
Info
C122-E178-02EN
131