Fujitsu PRIMEQUEST 2000 Series Message Reference page 152

MMB Messages
Hot-add SB cannot execute because the firmware version on specified SB is invalid or under updating of
firmware.
Corrective action:
Please confirm SB number and the configuration of DIMM.
If the firmware version of specified SB is different from the version of the specified partition, update firmware
of specified SB.
If system is updating of firmware wait for completing of firmware update.
Failed to create DR test partition
Meaning:
DR test partition cannot create.
Corrective action:
Retry the process. If it fails, contact your sales representative or a field engineer.
Unable to power on the DR test partition
Meaning:
Power of the DR test partition cannot turn on.
Corrective action:
Retry the process. If it fails, contact your sales representative or a field engineer.
Unable to power off the DR test partition
Meaning:
Power of the DR test partition cannot turn off.
Corrective action:
Retry the process. If it fails, contact your sales representative or a field engineer.
Hot-add [SB#$|IOU#$] failure
Meaning:
Hot-add SB/IOU cannot execute because there is Error or Warning of the specified SB/IOU.
Corrective action:
Confirm message. Replace it if failure of the component is found.
Hot-add [SB#$|IOU#$] failed
Meaning:
Hot-add SB/IOU was failed because an error occurred.
Corrective action:
Please process it according to other message.
Failed to execute DR operation. Fatal error occurred
Meaning:
DR operation was failed because a fatal error occurred.
Corrective action:
Please process it according to other message.
Failed to execute hotadd partition command
Meaning:
MMB internal error occurred in DR processing.
Corrective action:
Download SEL and contact your sales representative or a field engineer.
Failed to execute DR operation. Partition is stopped
Meaning:
Power of the partition is turn off or the partition is reset in DR processing.
Corrective action:
No action is necessary.
C122-E178-02EN
136