Fujitsu PRIMEQUEST 2000 Series Message Reference page 175

MMB Messages
The firmware update of %aa has been completed successfully.
Firmware Version: %bb
Meaning:
When this window appears after the specified firmware has been updated successfully, '%aa firmware has
been successfully updated' is notified.
Corrective action:
This window is displayed again when the [OK] button of the dialog box is clicked. Since the firmware update
has been processed successfully, click the [Next] button to continue the process.
Severity:
Info
W_00237
The power status of one of the partitions is now Standby.
The selected Maintenance Operation Mode has become unavailable.
Please check that the power status of partitions is On in the Partition Power Control Window.
Then please try again.
Meaning:
When the [Next] button was clicked after selecting Hot Partition Maintenance, check the partition status and
try again, as the power status of the target partition has been changed by a user operation.
Corrective action:
This window is displayed again when the [OK] button is clicked.
Check the power status of the partition in the [Partition Power Control] window. If the status is Standby, ask
the system administrator to power on the partition.
After confirmation, perform the maintenance work again.
Severity:
Warning
I_00238
There is no error information.
Meaning:
The message notifies that error information of the unit was collected but no error was detected.
Corrective action:
No action is necessary.
Severity:
Info
W_00238
Specified file is not a firmware file.
Please select a valid firmware file.
Meaning:
The file specified for the firmware update process is not a firmware file.
Corrective action:
This window is displayed again when the [OK] button is clicked. Specify the correct firmware file.
Severity:
Warning
W_00239
Specified file is not a %aa firmware file.
Please select a valid %aa firmware file.
Meaning:
A file which is not a %aa firmware file has been specified in the firmware update.
Corrective action:
This window is displayed again when the [OK] button is clicked. Specify the correct firmware file.
Severity:
Warning
W_00240
Specified file does not correspond to this model type.
Please select a valid firmware file model type.
Meaning:
C122-E178-02EN
159