Fujitsu PRIMEQUEST 2000 Series Message Reference page 157

MMB Messages
I_00015
It has already reached the maximum number of login users.
There is a possibility that the window was shut without logging out.
Please login again after it waits for a few minutes.
Meaning:
The maximum number of concurrent login sessions has been exceeded.
Corrective action:
Wait until the logged-in user logs out.
However, if the maximum number of concurrent login sessions has been exceeded, due to unsuccessful log
out, wait for three minutes and then log in again.
Severity:
Info
E_00018
Information acquisition failed.
Meaning:
Acquisition of information required for the window display has failed.
Corrective action:
Retry the process. If it fails, contact your sales representative or a field engineer.
Severity:
Error
E_00019
Can't acquire the query string.
Meaning:
Acquisition of the query string has failed.
Corrective action:
Retry the process. If it fails, contact your sales representative or a field engineer.
Severity:
Error
E_00020
The IP address overlaps.
Meaning:
The IP address is duplicated.
Displayed when the IP address set in a window is duplicated with another IP address that had been set in
the MMB of another window.
Corrective action:
Check the IP address.
Severity:
Error
E_00022
The partition doesn't have a node.
Meaning:
There is no node in the selected partition.
In case of Remove：
•
Displayed when a partition is selected to remove a node, and all nodes have been removed by another user.
In case of Home：
•
Displayed when there is no SB in the selected partition for configuring the Home, or all the SBs have been
removed by another user.
Corrective action:
Check the configuration.
Severity:
Error
I_00029
Status Clear completed.
Meaning:
The status is cleared.
141
C122-E178-02EN