Fujitsu PRIMEQUEST 2000 Series Message Reference page 140

MMB Messages
Corrective action:
Check the System Event Log for errors, and try updating the firmware again.
Severity:
Error
The specified SB#%aa cannot be registered as a Reserved SB.
The specified SB#%aa cannot be registered as a Reserved SB.
Corrective action:
Try setting again. If it fails, contact your field engineer.
Severity:
Error
Failed to execute show partition name command.
Meaning:
The show partition name command has terminated abnormally.
Corrective action:
If another message is output, see the message.
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
Password changed.
Meaning:
The password has been changed.
Corrective action:
No action is necessary.
Severity:
Info
change passwd failed (code=aa)
Meaning:
The password change has failed.
aa ：Exception code
Corrective action:
If another message is output, see the message.
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
Could not set attributes
Meaning:
The setting of the terminal information has failed.
Corrective action:
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
invalid passwd
Meaning:
An invalid character has been used in the password.
Corrective action:
Check the command parameter.
Severity:
Warning
password needs 8 characters at least
Meaning:
At least eight characters are required in the password.
C122-E178-02EN
124