Fujitsu PRIMEQUEST 2000 Series Message Reference page 204

Dynamic Reconfiguration Messages
Meaning:
Collaboration program<x> exited with status <y> at <z> timing. <z> represents "before" or "after"
Corrective action:
IOU hot-remove was aborted because of the failure of collaboration program<x>.
Please review the output messages of collaboration program<x>
dr-util:ERR:%d: IOU<x> status is invalid: <y>
[%d: 453, 454]
Meaning:
The status of IOU slot <X> is invalid.
Corrective action:
Failed to check the IOU<x> slot status.
Please gather the information for investigation by using "/opt/FJSVdr-util/sbin/dr report" on the partition side,
and contact the technology of our company member
dr-util:ERR:%d: Internal Error
[%d: 455, 456]
Meaning:
Internal error occurred.
Corrective action:
Please gather the information for investigation by using "/opt/FJSVdr-util/sbin/dr report" on the partition side,
and contact the technology of our company member.
dr-util:ERR:460: Failed to add Pcie<x> with error <y>.
Meaning:
Failed to add PCIe<x> with error number <y>
Corrective action:
The addition of PCIe<x> failed because of the error <y>
Please confirm the error messages and do corrective action according to error.
dr-util:ERR:461: Failed to remove Pcie<x> with error <y>.
Meaning:
Failed to remove PCIe<x> with error number <y>
Corrective action:
The remove of PCIe<x> failed because of the error <y>
Please confirm the error messages and do corrective action according to error.
Please try removing of PCIe again. When the improvement is not seen even if it executes it again, please
gather the information for investigation by using "/opt/FJSVdr-util/sbin/dr report" on the partition side, and
contact the technology of our company member
dr-util:ERR:%d: PCIe<x> status is invalid: <y>.
[%d: 462, 463]
Meaning:
The status of PCIe slot <X> is invalid
Corrective action:
Failed to check the PCIe<x> slot status
Please gather the information for investigation by using "/opt/FJSVdr-util/sbin/dr report" on the partition side,
and contact the technology of our company member
dr-util:ERR:%d: Internal Error.
[%d: 470-483]
Meaning:
Internal error occurred.
Corrective action:
Please gather the information for investigation by using "/opt/FJSVdr-util/sbin/dr report" on the partition side,
and contact the technology of our company member.
C122-E178-02EN
188