Fujitsu PRIMEQUEST 2000 Series Message Reference page 191

MMB Messages
Severity:
Warning
E_00490
Unable to add the specified SB to the partition due to DIMM does not satisfy requirements of Mode.
Meaning:
The specified SB cannot be added to the partition because the Memory Mode cannot support the DIMM.
Corrective action:
Check the location and mix status of the DIMMs mounted on the SB.
Severity:
Error
E_00491
Unable to power on the partition#%d due to DIMM does not satisfy requirements of Mode.
Meaning:
Unable to power on the partition #%d because the DIMM is in a configuration that does not meet the
Memory Mode requirements.
Corrective action:
Check the location and mix status of the DIMM mounted on the SB.
Severity:
Error
W_00492
Unable to register the specified SB#%d as a Reserved SB due to Partition is Fixed I/O Mode.
Meaning:
The specified SB cannot be registered as a Reserved SB because the partition is a fixed I/O mode.
Corrective action:
Check the PCI Express Mode settings of the partition.
Severity:
Warning
W_00493
Unable to register the specified SB#%d as a Reserved SB due to abnormal DIMM composition.
Meaning:
The specified SB cannot be registered as a Reserved SB because the DIMM configuration is abnormal.
Corrective action:
Check the location and the mix status of DIMM mounted on the SB.
Severity:
Warning
I_00494
The DIMM does not satisfy requirements of Mirror Mode.
If you register the specified SB%s as a Reserved SB, Mirror Mode will be disabled when switching to
specified SB.
Are you sure to continue?
Meaning:
DIMM does not satisfy the requirements of the Mirror Mode. When SB%s thus specified is registered as a
Reserved SB, the Mirror Mode will be canceled when switching to the Reserved SB. The message asks for
confirmation to continue processing.
Corrective action:
To continue the setting, click the [OK] button in the confirmation dialog box. To terminate the setting, click
the [Cancel] button in the confirmation dialog box.
Severity:
Info
W_00495
Unable to power on the partition#%d due to DIMM does not satisfy requirements of Mirror Mode.
After checking SB status and configuration, please come back to the Replacement Instruction
Window, and reinstall the unit.
C122-E178-02EN
175