Fujitsu PRIMEQUEST 2000 Series Message Reference page 166

MMB Messages
Meaning:
Another user is performing the maintenance. Release the maintenance mode before proceeding with the
operation.
Corrective action:
Release the maintenance mode before proceeding.
Severity:
Info
I_00203
Please select a unit to perform maintenance on.
Meaning:
The unit is not selected.
Corrective action:
Select a unit.
Severity:
Info
I_00204
A unit not in maintenance has been selected.
Are you sure?
Meaning:
The selected item is outside the scope of maintenance range. The message asks for proceeding with the
process.
Corrective action:
A confirmation window appears when the user selects a unit which is not in the scope of maintenance and
clicks the [Status Clear] button.
The status of the selected unit is cleared when the [OK] button is clicked.
Severity:
Info
I_00205
Please select a unit to clear the status.
Meaning:
Displayed when the [Status Clear] button is clicked, without selecting the status clear target (All/
Partition/Unit/Unit Parts). This message is not displayed if the user clicks the [Skip] button without any
selection.
Corrective action:
Select the unit to be status cleared.
Severity:
Info
W_00205
Maintenance of the unit cannot be performed using Hot Partition Maintenance because partition
containing the target does not a have its OS running.
Check the system progress of partitions in the Partition Power Control Window.
Then please try again.
Meaning:
'Hot Partition Maintenance process has failed, because the maintenance target partition has been stopped,
or the operating system is not running for System Progress. Check the power status of the partition and
execute the process again' is notified, when an attempt is made to perform the Hot Partition
Maintenance when the maintenance target is in the Standby status, or when the operating system is not
running for System Progress.
Corrective action:
Confirm in the [Partition Power Control] window, that the operating system is running for the partition System
Progress. If the operating system is not running, ask the system administrator to get the operating system
running for the System Progress of the partition. After confirming, perform the maintenance again.
Severity:
Warning
I_00206
C122-E178-02EN
150