Fujitsu PRIMEQUEST 2000 Series Message Reference page 193

MMB Messages
Check the of the DIMM configuration of the SB configuring the partition.
Severity:
Error
I_00501
The SB with DIMM that does not satisfy requirements of Mirror Mode is registered as a Reserved SB.
If you register this partition as a Mirror Mode, Mirror Mode will be disabled when switching to
Reserved SB. Are you sure to continue?
Meaning:
An SB containing a DIMM that does not meet the requirements of the Mirror Mode is allocated as a
Reserved SB.
When the partition specified thus is registered as a Mirror Mode, the Mirror Mode will be canceled when
switching to the Reserved SB. The message asks for confirmation to continue processing.
Corrective action:
To continue the setting, click the [OK] button in the confirmation dialog box. To cancel the setting, click the
[Cancel] button in the confirmation dialog box.
Severity:
Info
I_00502
The firmware is updating.
Meaning:
Notifies that it is a firmware update is in progress.
Corrective action:
None
Severity:
Info
W_00504
The Power On failed, because of switching the Home SB.
Execute it after a while again.
Meaning:
Power on has failed since the Home SB is being switched.
Retry after some time.
Corrective action:
Retry after some time.
Severity:
Warning
W_00505
Unable to set configuration because the power on/off is processing.
Execute it after a while again.
Meaning:
The partition configuration cannot be changed because the power of the partition is in operation. Wait for
some time and then retry.
Corrective action:
Wait for some time and then retry.
Severity:
Warning
W_00506
Unable to set the OS Installation Mode because this partition is powered off.
Meaning:
The installation mode of the operating system cannot be set because the partition is in the Power Off state.
Corrective action:
Change the mode after turning on the partition power.
Severity:
Warning
C122-E178-02EN
177