Fujitsu PRIMEQUEST 2000 Series Message Reference page 199

Dynamic Reconfiguration Messages
Meaning:
This operation is prohibited.
Corrective action:
SB hot plug operation via DR command is not allowed. Please do SB hot plug via MMB UI.
dr-util:ERR:%d: <x>: invalid device is set.
[%d: 210-214]
Meaning:
<x> is not a device that can be specified with "add"
Corrective action:
The invalid device for "add" operation was set to the argument. Please review the command argument and
execute the command again.
dr-util:ERR:%d: <x>: invalid device is set.
[%d: 215-219]
Meaning:
<x> is not a device that can be specified with "rm"
Corrective action:
The invalid device for "rm" operation was set to the argument. Please review the command argument and
execute the command again.
dr-util:ERR:%d: <x>: invalid device is set.
[%d:220-224,228]
Meaning:
<x> is not a device that can be specified with "show"
Corrective action:
The invalid device for "show" operation was set to the argument. Please review the command argument
and execute the command again.
dr-util:ERR:%d: <x>: invalid device is set.
[%d:225-227]
Meaning:
<x> is not a device that can be specified with "stat"
Corrective action:
The invalid device for "stat" operation was set to the argument. Please review the command argument and
execute the command again.
dr-util:ERR:230: SB%d : invalid device is set
Meaning:
SB%d is not the SB device that can be removed.
%d represents the SB number.
Corrective action:
Failed to remove SB because OS kernel uses the memory on SB to be removed.
Please confirm if SB to be removed is correct.
dr-util:ERR:%d: "%s" : Invalid argument.
[%d: 240-245, 249]
Meaning:
Invalid argument.
Corrective action:
Invalid argument was specified. Please review the command argument and execute the command again.
dr-util:ERR:%d: "%s" : Invalid argument.
[%d: 246-248]
Meaning:
Invalid argument.
Corrective action:
Invalid argument was specified. Please review the command argument and execute the command again.
dr-util:ERR:260: "%s" : invalid subcommand is set
Meaning:
Invalid argument.
Corrective action:
Invalid argument was specified. Please review the command argument and execute the command again.
C122-E178-02EN
183