Fujitsu PRIMEQUEST 2000 Series Message Reference page 206

Dynamic Reconfiguration Messages
dr-util:INFO:804: Add MEM <x> (total <y>) .
Meaning:
Memory<x> (total <y> kB) will be added.
This indicates that OS will add memory<x> (total<y> kB.)
dr-util:INFO:805: Added MEM <x> (total <y>).
Meaning:
Memory<x> (total <y> kB) was added.
This indicates that OS added memory<x> (total <y> kB)
dr-util:INFO:%d: Execute <x> user programs at <y> timing.
[%d: 806,807]
Meaning:
<x> of collaboration programs will be executed at <z> timing.
<z> represents "before" or "after"
dr-util:INFO:808: Executed user programs at <x> timing.
Meaning:
Collaboration programs executed at <x> timing. <x> represents "before" or "after"
dr-util:INFO:809: Added SB<x>.
Meaning:
The addition of SB<x> exited .
This indicates success of SB hot-add.
dr-util:INFO:820: Detected SB hot-remove.
Meaning:
SB hot-remove was detected.
This indicates that OS detected SB-hotremove.
dr-util:INFO:821: Remove SB <x>, Node <y>..
Meaning:
SB<x>, Node<y> was removed.
This indicates that OS removes SB<x> and Node<y>
dr-util:INFO:822: Remove CPU <x> (total <y>).
Meaning:
CPU<x> (total <y>) will be removed.
This indicates that OS will remove CPU<x>, total <y> of CPUs
dr-util:INFO:823: Removed CPU <x> (total <y>).
Meaning:
CPU<x> (total<y>) was removed.
This indicates that OS removed CPU<x>, total <y> of CPUs.
dr-util:INFO:824: Remove MEM <x> (total <y>).
Meaning:
Memory<x> (total <y> kB) will be removed.
This indicates that OS will remove memory<x> (total <y> kB).
dr-util:INFO:825: Removed MEM <x> (total <y>).
Meaning:
Memory<x> (total<y> kB) was removed.
This indicates that OS removed memory<x> (total <y> kB)
dr-util:INFO:%d: Execute <x> user programs at <y> timing.
[%d: 826, 827]
Meaning:
<x> of collaboration programs will be executed at <z> timing.
<z> represents "before" or "after"
dr-util:INFO:828: Executed user programs at <x> timing.
Meaning:
Collaboration programs executed at <x> timing. <x> represents "before" or "after"
C122-E178-02EN
190