Fujitsu PRIMEQUEST 2000 Series Message Reference page 132

MMB Messages
A required parameter is missing.
This message appears when add only/remove only / set only/show only is entered.
Corrective action:
Check the command parameter.
Severity:
Warning
Failed to execute remove partition command.
Meaning:
The remove partition command process has failed.
Corrective action:
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
The specified parameter is invalid.
Meaning:
An invalid parameter has been specified.
Corrective action:
Check the command parameter.
Severity:
Warning
Unable to power on the Partition#%d due to CPU mismatch between SBs.
Meaning:
Power On has failed since Partition#n contains different types of CPUs, mixed between the SBs. (The
message appears as in multiple lines, if there are multiple partitions having CPU combination error. Power
On continues in partitions that do not have errors.)
Corrective action:
Make sure that the CPUs mounted on the SBs configuring the partition are the same.
Severity:
Warning
Unable to power on the Partition#%d.
Meaning:
Partition#x cannot be powered On.
Corrective action:
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
Unable to power off the Partition#%d.
Meaning:
Partition#x cannot be powered Off.
Corrective action:
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
Unable to force power off on the Partition#%d.
Meaning:
Partition#x cannot be forcibly powered Off.
Corrective action:
Try setting again. If it fails, contact your sales representative or a field engineer.
Severity:
Error
Command Failed. Code=0xaaaa, 0xbb
C122-E178-02EN
116