Fujitsu PRIMEQUEST 2000 Series Message Reference page 80

MMB Messages
C8A70E03
BBU on RAID controller: temperature problem detected
Meaning:
Temperature problem of FBU on RAID controller detected
Corrective action:
1. Please confirm the temperature of ambient is in a regulated value.
2. When the problem is not canceled, it is necessary to exchange the FBU.
Severity:
Warning
C8A70E04
BBU on RAID controller: removed
Meaning:
The voltage has decreased remarkably.
Corrective action:
Please confirm firmware version of the RAID controller and update latest version. Please wait for the charge
completion of the battery. Please exchange FBU when the problem is not canceled after the charge is
completed.
Severity:
Warning
C8A70E05
BBU on RAID controller: BBU/charger problem detected; SOH bad
Meaning:
The charge with the battery is insufficient.
Corrective action:
Please exchange FBU.
Severity:
Warning
C8A70E06
BBU on RAID controller: Error with the remote BBU connector cable detected
Meaning:
Problem of the cable of FBU was detected.
Corrective action:
Please exchange the cable of FBU.
Severity:
Warning
C8A70E07
BBU on RAID controller: requires reconditioning; please initiate recalibration
Meaning:
The reconditioning of the battery is necessary.
Corrective action:
1. Please do the recalibration. Please do not interrupt the charge by reboot and shutdown.
2. When the problem is not canceled, it is necessary to exchange the FBU.
3. When the problem is not canceled, please gather the survey material because a detailed investigation is
necessary for that and contact the repair chat channel.
Severity:
Warning
C8A70E08
BBU on RAID controller: retention test failed
Meaning:
It failed in the retention test of the battery.
Corrective action:
Please recovery according to the error message. When the problem is not canceled, please gather the
survey material because a detailed investigation is necessary for that and contact the repair chat channel.
Severity:
C122-E178-02EN
64