Change Filter; Combining Several Filters; Status Bar Functions; Printing Out Data - Bosch FPA‑5000 User Manual

70 en | Maintenance – history log
16.3

Change Filter

On each filter menu, another filter can be set using the status bar:
1.
2.
16.4

Combining several filters

It is possible to set several filters and to display all filtered data in a list:
To combine the Device types filter with the Message types filter:
1.
2.
3.
4.
5.
6.
7.
16.5

Status bar functions

The following functions are offered:
Change filter
Go to no.
Go to day
Print
Exit
16.6

Printing out data

Either the complete list or a specific part of it can be printed out.
To print out data that is displayed on a list:
1.
2020-07 | 3.0 | F.01U.378.877
Select Change filter from the selection bar below.
The various filters are displayed.
Select one of the filters displayed.
A list with filtered data is displayed.
Select Maintenance from the start menu
History Log
Select a filter, e.g. Device types.
Select Change filter in the selection list.
Select the desired device types from the displayed list.
Repeat steps 4 to 5 until all desired filters have been selected.
To display all filtered data of the combined filters:
Select Show filter result.
To switch to the status bar on the start page, press the "double
arrow" key in the status bar or on the membrane keypad.
If the field has a black background, a filter has been set. Select
this field to set a different filter.
Enter the number of a specific event.
The event with the selected number is displayed at the start of
the list.
Enter a date.
All events with the selected date are displayed in the list.
Print the complete displayed list or only a part of it.
End the entry and switch to the menu overview for the
Maintenance menu.
Select Print from the status bar.
Two possibilities are offered:
– Entire list: The complete list is selected.
To print the list, continue with step 6.
– Define range: Specify a particular area within the list.
The following two possibilities are available to specify the area of the list to be printed
out:
– Limit the number of events, counted from the newest event.
– Specifying a particular area via the entry of the event numbers.
User Guide
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Bosch Sicherheitssysteme GmbH