Table of Contents
Advertisement
26/83
Bosch Rexroth AG
Technical Data
Contact assignment of the key
Technical data of the key switch
4.3
Switching Elements
●
Removal only in left position (position 1)
●
Contacts electrically isolated
●
Forced opening contact
Position
switch
1
2
3
4
Fig.4-4:
Contact assignment of the key switch
Manufacturer
Designation of the manufacturer CG4 D-243P*01 FS1
Max. connection cross-section
Fig.4-5:
General data of the key switch
AC voltage,
Utilization category AC-15
Fig.4-6:
AC values according to IEC EN 60947-3, VDE 0660 Part 107
DC switching capacity
Fig.4-7:
DC values Ohmic circuits (T ≤ 1 ms)
DC switching capacity
Fig.4-8:
DC values inductive circuits (T = 50 ms)
The VAM 11.1/VAM 41.1 devices feature cut-outs for 22.5 mm control and in‐
dicator units, which are not available for all variants. The following tables list
the technical data of the integrated LED modules as well as N/O and N/C con‐
tacts.
Manufacturer
Designation of the manu‐
facturer
Connection cross-section
DOK-SUPPL*-VAM*11/41**-PR03-EN-P
Rexroth IndraControl VAM 11.1/41.1 Machine Control Panels
Contacts closed
1-2
5-6
7-8
3-4
Kraus & Naimer
One or multiple wire
Fine-wire
110 V – 110 V
220 V – 240 V
24 V
48 V
24 V
48 V
Télémecanique (Schneider Electric)
Standard auxiliary switch,
N/O contact: ZBE-101
Standard auxiliary switch,
N/C contact (with forced
opening): ZBE-102
Minimum without core end
sleeves
Maximum without core end
sleeves
2 x 1.5 mm
2
2 x AWG 14
2 x 1.5 mm
2
2 x AWG 16
2.5 A
2.5 A
10 A
6 A
6 A
1 A
1 x 0.22 mm
2
2 x 1.5 mm
2
Advertisement
Table of Contents
