Fire Alarm; Medical Alarm; Tamper Alarm (Access Denied); Isolating Zones - Bosch ICP-CC404 User Manual

ICP-CC404 | User's Guide | 9.0
8.3

Fire Alarm

The horn speaker emits a distinct fire sound when
you press [4] and [6] simultaneously. Contact your
installer to disable the ability to activate the codepad
fire alarm or to silence the codepad fire alarm.
8.4

Medical Alarm

An audible alarm activates when you press [7] and
[9] simultaneously. Contact your installer to disable
the ability to activate the codepad medical alarm or
to silence codepad medical alarm.
8.5

Tamper Alarm (Access Denied)

The tamper alarm restricts the number of times
someone can attempt to use an invalid user code to
operate the system. When the number of incorrect
code attempts equals the number programmed by
your installer, the system activates an alarm. If
reporting back to a security monitoring station, the
system sends an Access Denied Report.
To shut down and lock out a codepad for a period of
time (0 to 150 sec), ask your installer to program this
feature.

9.0 Isolating Zones

Isolating zones allow you to manually disable one or
more zones before arming the system. Once a zone is
isolated, you can access that zone during the armed
state without activating an alarm.
For example, you might need to isolate a zone
because before arming the system a PIR detector
might generate a false alarm, or you need to leave a
pet inside a particular zone while away.
Isolating zones is performed by one of two methods.
The second method is optional and only allows those
user codes programmed by your installer access to
isolate zones.
9.1

Standard Isolating

Standard isolating allows all operators to isolate
zones without knowing a valid user code.
To isolate a zone:
1. Press [*] twice to enter Isolating Mode.
Three beeps sound and the STAY indicator
flashes.
2. Enter the zone number (1 to 8) and press [*] (for
example, [1 *] for Zone 1, or [2 *] for Zone 2).
Each zone to isolate has a corresponding zone
indicator that flashes.
If you selected an incorrect zone to isolate, enter
the incorrect zone number again and press [*].
Repeat Step 2 if you are isolating more than one
zone, until all zones you want to isolate are
selected.
10
Isolating Zones
3. Press [#] after you isolate all selected zones.
Two beeps sound and the system returns to the
disarmed state.
9.2

Code to Isolate

Only the user codes with the Code to Isolate priority
level can isolate zones. If any user code has this
priority level, the standard isolating method (refer to
Section 9.1 Standard Isolating) does not function.
To isolate a zone:
1. Press [*], enter your user code, and press [*]
again to enter Isolating Mode (for example,
[* 2 5 8 0 *]).
Three beeps sound and the STAY indicator
flashes.
2. Enter the zone number (1 to 8) and press [*] (for
example, [1 *] for Zone 1 or [2 *] for Zone 2).
Each zone to isolate has a corresponding zone
indicator that flashes. If you selected an incorrect
zone to isolate, enter the incorrect zone number
again and press [*].
If you are isolating more than one zone, repeat
Step 2 until you select the zones you want to
isolate.
3. Press [#] after all selected zones are isolated.
Two beeps sound and the system returns to the
disarmed state.

10.0 Setting the Date and Time

Programming the date and time is only required
when you need functions such as automatic test
reports, automatic arming, and history events to
operate correctly.
To program the date and time:
1. Enter your Master Code and press [6 #] (for
example, [2 5 8 0 6 #]).
Three beeps sound and the STAY and AWAY
indicators flash.
2. Enter the day, month, year, hour, and minute
using the (DD, MM, YY, HH, MM) format (that
is, DD = day of the month, MM = month of the
year, YY = current year, HH = hour of the day,
MM = minute of the day).
3. Press [#] to exit and return to the disarmed state.
Two beeps sound and the STAY and AWAY
indicators turn off. A long beep sounds if you
incorrectly entered the date and time.
Bosch Security Systems, Inc. | 10/08 | F01U089400-01
When programming the hour of the day,
you must use a 24-hour format.