Changing An Entry; Deleting All Numbers; Changing Language Display; Entering Key Combination - Bosch MPC-xxxx-C Series User Manual

Panel Controller
This takes the cursor to the next free character and you can continue with entering the next
letter.
5.9.1

Changing an entry

1.
2.
5.9.2

Deleting all numbers

1.
2.
3.
5.10

Changing language display

There are two ways to select another language display:
–
–
5.10.1

Entering key combination

1.
2.
3.
Notice!
After the system starts up following a power cut or battery failure, the default language
defined in the FSP-5000-RPS programming software is set again.
5.11

Switching between status bars

The status bar offers further functions, display and selection options.
If the "double arrow" symbol is displayed in the status bar, it is possible to switch to the
status bar of the start menu. To do this, press the "double arrow" key on the membrane
keypad.
5.12

Standby

If no longer operated, the panel controller switches to standby mode after 5 minutes. The
touch screen backlighting switches off. To quit standby mode, touch any part of the touch
screen.
5.13

Logical and physical addressing

When addressing elements, there is a distinction between logical and physical addressing:
Bosch Sicherheitssysteme GmbH
In order to change a number, press the "left arrow" or "right arrow" keys until the cursor
marks the number in the search screen that is to be replaced.
To overwrite the marked number, press the key with the required number until the
number you require is displayed in the search screen.
In order to delete all numbers in the search screen, press the "left arrow" key until the
cursor marks the first number.
Enter a new number using the number pad.
All numbers up to the digit entered are deleted.
If you wish to, continue entering the numbers.
By entering a shortcut
Via a menu selection; see Changing language display, page 70.
Select the "home" key immediately followed by the 1 on the alphanumeric keypad. A
query window will appear.
Select OK to confirm the entry or Cancel to cancel the operation.
A list of the existing languages is displayed.
Select the language you require.
The displays will now be shown in the selected language.
User Guide
Operating principle | en 31
2017.09 | 7.0 | F.01U.258.929