Chapter 8 Appendix; E-Studio2303Am/2803Am Specifications - Toshiba e-STUDIO2303AM User Manual

8 Appendix

e-STUDIO2303AM/2803AM Specifications

Model name
Type
Original glass
Printing (copying) system
Developing system
Fusing method
Photosensor type
Original scanning system
Original scanning sensor
Scanning light source
Resolution
Acceptable originals
Acceptable original size
Acceptable paper size
Acceptable paper weight
Warm-up time
First copy time (A4 or LT portrait)
Continuous copy speed
Multiple copying
Excluded image width
Reproduction ratio
Storage capacity
Paper supply
Loading capacity for the receiving tray
Toner density adjustment
Exposure control
Memory
USB interface
Environment (for normal use)
182

e-STUDIO2303AM/2803AM Specifications

DP-2303AM/2803AM
Desktop type
Fixed
Indirect electrophotographic method
2-component magnetic brush developing
Two halogen lamp
OPC
Flat surface scanning system
(When the RADF is installed: Fixed scanning system by
feeding the original)
CMOS
LED
Writing 2400 dpi x 600 dpi (Smoothing process)
Scanning 600 dpi x 600 dpi
Sheets and books
Original glass: Max. A3 or LD
RADF: Max. A3 or LD
Drawer A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R,
ST-R, COMP, 13"LG, 8.5"SQ, 8K, 16K, 16K-R
Bypass A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R,
ST-R, COMP, 13"LG, 8.5"SQ, 8K, 16K, 16K-R,
COM10, Monarch, DL
Drawer
2
64 - 80 g/m
Bypass
2
64 - 80 g/m
2
52 - 63 g/m
Bond - 110 lb. Index/80 lb. Cover) : for single feed
Approx. 18 seconds
A4: Approx. 6.4 seconds
LT: Approx. 6.5 seconds
See  P.183 "Continuous copying speed"
Up to 999 copies
Copy Leading edge: 3.0±2.0 mm (0.12"±0.08")
Trailing edge: 2.0±2.0 mm (0.08"±0.08")
Both edges: 2.0±2.0 mm (0.08"±0.08")
Printer Leading edge: 5.0±3.0 mm (0.20"±0.12")
Trailing edge: 5.0±3.0 mm (0.20"±0.12")
Both edges: 5.0±3.0 mm (0.20"±0.12")
Actual size 100±0.5%
Zoom 25 - 400% (in 1% increments)
Max. 150 sheets or until the memory is full (TOSHIBA's own
chart)
Drawer
250 sheets (80 g/m
Bypass
100 sheets (80 g/m
Approx. 100 sheets (80 g/m
Magnetic auto-toner system
Automatic plus manual selection from 9 exposure steps
512MB
USB2.0 (Hi-Speed)
Temperature: 10 º - 30 ºC, Humidity: 20 - 85% (No
condensation)
(17 - 20 lb. Bond)
(17 - 20 lb. Bond) : for continuous feed
(14 lb. Bond - 16 lb. Bond), 81 - 216 g/m
2
, 20 lb. Bond)
2
, 20 lb. Bond)
2
, 20 lb. Bond)
2
(21 lb.