Setting The Ip Fax Function From Topaccess; Setting Procedure - Toshiba e-STUDIO A Series Operator's Manual

Setting the IP Fax Function from TopAccess

0.
Perform the necessary settings from TopAccess in order to use the IP Fax function.
 P.16 "Setting procedure"
 P.17 "General settings"
 P.18 "IP Fax Settings"
 P.30 "Address Book"
For how to operate TopAccess, refer to the TopAccess Guide.
 Setting procedure
This explains about the settings to use the IP Fax function.
For necessary information, such as telephone numbers, related to the setting and registration of each device (SIP
server, T.38 supporting gateway) used for receiving/sending an IP Fax, contact the administrator of each device.
Setting
Operation
1 IP Fax Send/IP Fax Receive
functions confirmation
2 General settings
3 SIP settings
4 Gateway settings
5 Address book settings
16 Setting the IP Fax Function from TopAccess
Description
Check that [Enable] is set for the IP Fax Send
and the IP Fax Receive functions.
Specify the settings related to the IP Fax
operation from the touch panel.
Set the necessary settings when a SIP server
is used.
Set the necessary settings when a T.38
supporting gateway is used.
Set or edit the recipients of the address
book.
Reference
 P.17 "Functions"
 P.18 "General Setting"
 P.22 "SIP Setting"
 P.26 "Gateway Setting"
 P.30 "Address Book"