Duplex (Double-Sided) Printing - Toshiba e-STUDIO222CS Printing Manual

D ( -
UPLEX DOUBLE SIDED
If your printer has a duplex unit installed you can print on both sides of the paper, to save
paper, weight, bulk and cost.
NOTE
If this choice does not appear in the driver screens, or if it is grayed out, check
to ensure that the storage device is enabled in the printer driver.
the driver device options" on page
> Only paper can be used for duplex printing, not transparencies or other media.
> Use paper stock of 75–188 g/m² maximum. If you experience excessive curling with
75–90 g/m² paper, use 105 g/m².
Paper weights are given as a guide only and may not be available
for use with your printer. Always check the paper weight
specifications in your User's Guide before printing. Do not exceed
the recommended paper weight specified.
> Use standard sized paper stock only, e.g. A4, A3, Letter, etc.
> Load the paper print side up. Ream wrappers are usually marked with an arrow,
indicating which is the print side.
> Paper can be fed from standard paper trays, including the high capacity feeder if you
have one.
NOTE
For paper stock greater than 120 g/m² use the multipurpose tray.
> Do not set the paper weight to Ultra Heavy.
> Do not enable the White Page Skip function.
)
PRINTING
12.)
CAUTION!
Finishing options > 59
(See "Setting