Cleaning The Inside Of The Equipment; The Main Chargers And Led Print Heads (E-Studio2020Ac/2520Ac) - Toshiba E-STUDIO 2020ac Troubleshooting Manual

Multifunctional digital color systems / multifunctional digital systems
Hide thumbs Also See for E-STUDIO 2020ac:
Table of Contents

Advertisement

Cleaning the Inside of the Equipment

0.
When the inside of the equipment needs to be cleaned, the message "Time for cleaning. Open the front cover and
follow the guidance." is displayed. In this case, clean the inside of the equipment following the guidance displayed on
the touch panel. (Depending on the model, this message may not be displayed.)
In addition to this, even if this message is not displayed, perform cleaning when the copied images are uneven and/or
have white or color streaks in the horizontal direction.
 The Main Chargers and LED Print Heads (e-STUDIO2020AC/2520AC)
1
Open the front cover of the equipment.
Pull out the cleaner until the mark appears and return it. Repeat this 3 times for each of the 4
2
colors.
The cleaner cannot be removed by design. Pulling it out forcibly may cause malfunction.
When only the main chargers need to be cleaned, steps 3 to 12 are unnecessary. Proceed to step 13.
3
Put your fingers in the waste toner box front grooves and take it out toward you pushing down
the top latch.
1
1
2

Cleaning the Inside of the Equipment 85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents