Channel<N>:Input - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

33
Obsolete and Discontinued Commands
:CHANnel<n>:INPut
Command Syntax
:CHANnel<n>:INPut <impedance>
<impedance> ::= {ONEMeg | FIFTy}
<n> ::= 1 to (# analog channels) in NR1 format
The :CHANnel<n>:INPut command selects the input impedance setting for
the specified channel. The legal values for this command are ONEMeg (1
M ) and FIFTy (50 ).
The :CHANnel<n>:INPut command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :CHANnel<n>:IMPedance command (see
instead.
Query Syntax
:CHANnel<n>:INPut?
The :CHANnel<n>:INPut? query returns the current input impedance
setting for the specified channel.
Return Format
<impedance value><NL>
<impedance value> ::= {ONEM | FIFT}
712
(see page 790)
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
page 223)