Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual page 643

The :WAVeform:POINts:MODE? query returns the current points mode.
Setting the points mode will affect what data is transferred. See the
discussion above.
Return Format
<points_mode><NL>
<points_mode> ::= {NORMal | MAXimum | RAW}
See Also •
•
•
•
•
•
•
•
•
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
"Introduction to :WAVeform Commands"
":WAVeform:DATA" on page 637
":ACQuire:POINts" on page 188
":WAVeform:VIEW" on page 656
":WAVeform:PREamble"
":WAVeform:POINts" on page 640
":TIMebase:MODE" on page 579
":ACQuire:TYPE" on page 195
":ACQuire:COUNt" on page 186
on page 629
on page 644
30
:WAVeform Commands
643